Telestream.net

How to enable Javascript

Latest Posts

Re: Possible to have audio and captioning at the same time I checked the test stream on one of my Mac’s, it does work as you say but my audio is out of sync. Something else to work on. Haven’t had this issue before.
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- Wirecast Restream & Live Captions Q&A
- Reported - view
Re: Possible to have audio and captioning at the same time @Tom Prehn Thanks, i sent a test stream to my FB page and the only time the captioning is displayed is when I turn the volume all the way down. That is on my iPhone,…
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- Wirecast Restream & Live Captions Q&A
- Reported - view
Possible to have audio and captioning at the same time
Just wondering if it would be possible to have audio while the captioning is being displayed?
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- 4replies
- 230
- Wirecast Restream & Live Captions Q&A
Re: Deactivate / Activate @CraigS thanks Craig, so I can deactivate from home? I don’t have to be on the Mac I wish to deactivate?
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
Deactivate / Activate
How long does it take to deactivate then reactivate on a second Mac? is there a limit on how often you can do this and is it possible to do this remotely? Use a MacBook at Church for Wirecast,…
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- 3replies
- 164
- Wirecast Everything Else Q&A
Re: CPU useage @CraigS Thanks, wasn’t aware of that. I’ll install Sierra and get back with you. I’m surprised Wirecast installed if it required Sierra as the minimum.
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
CPU useage
CPU useage bounces between 44 and 100%. While streaming to two FB locations. Thought there may have been programs running in the background so I reformatted HD and did a fresh install of Wirecast,…
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- 3replies
- 130
- Wirecast Everything Else Q&A
Re: Wirecast 8 Serial number @CraigS thanks Craig, appreciate your help. How long does it normally take to retrieve my serial number after submitting the form?
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
Re: Wirecast 8 Serial number Thanks, just submitted the form. I reformattd because CPU % would bounce from 20% to 90-100%
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
Wirecast 8 Serial number
I had to reformat my HD. Did not copy my serial number. I reinstalled from a Time Machine backup but Titler is not there and WC is running in demo mode.…
- Rick
- =< Sub-Novice
- Rick
- 4 yrs ago
- 5replies
- 717
- 1
- Wirecast Everything Else Q&A
Re: Projecting a Live Stream @CraigS thanks, what I ended up doing was viewing the live stream on my iMac, ran NDI scan, reinstalled WC 7.7 pro on my MacBook brought up WC and ( I know,…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
Re: Projecting a Live Stream @CraigS sorry I wasn’t clear. I am simply wanting to record a Live Stream that I will be viewing on line.
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
CPU % way up after downloading Wirecast 8
Have been running WC 7.7 pro without issue. Wanted to look at 8.0 before paying for the upgrade, it changed my .wct file to run 8 I noticed cpu % was bouncing between 50 and 99 % settings and…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- 1reply
- 150
- Wirecast Everything Else Q&A
Re: Projecting a Live Stream @CraigS Thanks Craig, there has been a change, instead of sending to a projector, they would prefer I record the Live Stream for a later showing, also guess I'm not sure how to bring the stream into…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Everything Else Q&A
- Reported - view
Projecting a Live Stream
Our Church will be tuned in to a Live Stream that we would like to show through a lcd projector so everyone in the Sanctuary can view it. Should I bring the Live Stream into one Mac and use it as an…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- 7replies
- 282
- Wirecast Everything Else Q&A
Re: Wirecast 7.7 dropping frames @CraigS Will do. I am watching it on my iMac, good solid Output. On my monitors coming out of the BM Thunderbolt are a little jerky, never noticed that before.…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Streaming-Recording Q&A
- Reported - view
Re: Wirecast 7.7 dropping frames @CraigS sorry the CPU usage is actually 19-22% while streaming. The 14-16 I mentioned was on preview.
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Streaming-Recording Q&A
- Reported - view
Re: Wirecast 7.7 dropping frames @CraigS I am streaming to FB as we speak with NDI only. Says CPU indicates 14-16% confirmed ny activity monitor. Only been running about 5 min so far.
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Streaming-Recording Q&A
- Reported - view
Re: Wirecast 7.7 dropping frames @CraigS will do and will let you know the results. When it acted up yesterday after working fine for an hour I used Snagit to create a video show the wirecast CPU fluctuating between normal (29%) up…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Streaming-Recording Q&A
- Reported - view
Re: Wirecast 7.7 dropping frames @CraigS I removed 2 Output streams, 1 each FaceBook and YouTube. Left NDI running and CPU usage was 29-34% for about 1 hour then fluctuated between 50-100% finally dropping the wifi connection.
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Streaming-Recording Q&A
- Reported - view
Re: Wirecast 7.7 dropping frames @CraigS MacBook is Mid 2014 2.5 GHz Intel Core i7 I am not recording on the Mac, recording the HDMI output of the BM Thunderbolt. It has worked up until last week.…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Streaming-Recording Q&A
- Reported - view
0
Wirecast 7.7 dropping frames
This past Sunday, for the first time CPU usage exceed 100% intermittently to the point where I had to stop the stream. Usually runs around 60% it was bouncing between 69-100.…
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- 12replies
- 511
- Wirecast Streaming-Recording Q&A
Re: BM Intensity Shuttle @CraigS Understood and thanks for your help. I'll go with your earlier advice and use two Thunderbolt BMIS's and one USB BMIS
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Capture Devices and Sources Q&A
- Reported - view
Re: BM Intensity Shuttle @CraigS Thanks Craig, I will follow your advice. I can eliminate the SSHD and record on my BM Video Assist. How do you feel about daisy chaining USB BMIS's? Or is there no conceivable need/use?
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Capture Devices and Sources Q&A
- Reported - view
Re: BM Intensity Shuttle @CraigS Just trying to plan ahead. It's my nature to go overboard, character flaw I suppose. Anyway, using both USB ports on the MBP ( BMIS and Beringer mixer) and both Thunderbolts (BMIS and SSHD)
- Rick
- =< Sub-Novice
- Rick
- 5 yrs ago
- Wirecast Capture Devices and Sources Q&A
- Reported - view

1 2 Next

Back to top

Rick

Rick

=< Sub-Novice

Bristol, IN

49
1
0

Joined: 16 Mar 2017

Follow