NDI HX2: working on 13.1 not on Beta
Ok, I know this is kind of border testing but I have a device (Kiloview E2) that can output HX2. this device can switch between Hx1 and Hx2.
In NX2 mode (less bandwidth required for HX2) the stream show only audio in Wirecast beta, but works on 13.1 official.
The strange thing is that in OBS I have the same behavior (only sound) as in the Beta!
-
Ermanno Bonifazi said:
For some reason I think at this point the lib included in the beta is faulty as the one in Obs runtime with this operating systemPerhaps it's a combination of the two having an impact on both. We'll investigate the Newtek NDI Lib considering that neither OBS or Wirecast is uses that.
-
CraigS Craig, OBS and Wirecast do not use the same library. As said OBS use the library in usr/local/lib while Wirecast have its own embedded. In the mac mini I had a different library for OBS, and in fact when I installed the beta on the Mini, Wirecast was not working util i overwrite the library. For sure is a difficult investigation.
-
-
Ermanno Bonifazi said:
OBS and Wirecast do not use the same library.But it failed for you and not me. Something external might be causing the failure.
-
CraigS Installed the 14 and had the same problem, until i replace the lib. Now is working ok.
-
Ermanno Bonifazi We're investigating.
-
-
Same problem here! On my Mac Pro 2013 (with Catalina) NDI HX is not working. Only receiving the audio no video. Standard NDI works just fine. Then I receive video and audio.
I tried it on my other Macs also with Catalina, (iMac 2013 and Macbook Pro 2016), it works on these computers.
Until version 13.0.1 I had no problems and al worked just fine but from 14.0.0 I get this problem.-
Fernand Until we get this fixed copy over libndi from Newtek NDI Monitor to Wirecast as Ermanno describes.
-
CraigS Thanx! Got it working now.
-
Fernand You're welcome of course.
-